OWC Accelsior S
Storage Expansion With a Speed Boost
Add a 2.5" SATA 6G Drive to your Mac or PC
- Directly mount any standard 2.5" drive.
- Up to 550 MB/s sustained speeds.
- Enhance SATA 3Gb/s systems with SATA 6Gb/s support.
- Easy installation. No drivers required.
Give Your Mac Pro Tower or PC a 6G Performance Boost
Accelsior S is the simple solution to add a high speed SATA 6G drive to PCs or silver Mac Pro towers otherwise restricted to 3G architecture. Combined with a high-performance SSD, Accelsior S brings cutting edge 6G performance to your SATA 3G system.
Internal Storage Expansion at Lightning Speed
With more than 500 MB/s of throughput, the Accelsior S dual-lane PCIe 2.0 card delivers flexible storage expansion - with a speed boost - to your Mac or PC. Accelsior S is the perfect complement to OWC's Mercury family of high-performance SSD's, allowing up to an extra 1TB of fast storage expansion.
Just Plug and Play
Mount a 2.5" drive to the Accelsior S, install in any available PCIe x4 (or greater) slot, and you're up and running with expanded high-speed storage. Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance. With no drivers or extra software needed, upgrading your PC or legacy Mac Pro tower with Accelsior S is a breeze.
Highlights
- Bring 2.5" drive expansion to any x4 PCIe slot
- 3 year OWC Limited Warranty
Drive Compatibility
- When used together, the Accelsior S and the 2.0TB Mercury Electra 6G SSD are compatible with the MacPro4,1 series and MacPro5,1 series. This device combination is NOT compatible with the MacPro1,1 MacPro2,1 or MacPro3,1 series.
Note about throughput:
- PC Throughput:
- PCIe 2.0 x4 slot or better is required. Use of a PCIe 1.0 x4 slot will reduce performance.
- Mac Pro Throughput:
- 2009-2010 Mac Pro. Installing Accelsior S into any open x4 or x16 PCIe 2.0 slot will deliver full throughput
- 2008 Mac Pro. These models have two x16 PCIe 2.0 slots, which enable Acceslsior S to deliver full throughput. Installing Accelsior S into of the two x4 PCIe 1.0 slots will result in Accelsior S being addressed as a gen one, one-lane card with performance limited to real world 190-200MB/s data rates.
- 2006-2007 Mac Pro. These models utilize PCIe 1.0 slot which cannot be configured (even with the Expansion Utility in OS X) to address Accelsior S as anything but as a first generation one-lane card. As a result, Accelsior S performance will be limited to 190-200MB/s data rates. If maximum data rate speedis desired, we recommend the installation of a 2.5" OWC Mercury SSD in an open Mac Pro drive bay.
Mac Pro (Mid 2010 Quad-Core)
(July, 2010)
Model ID: MacPro5,1
2.8GHz, 3.2GHz, 3.33GHz
Mac Pro 6-Core
(Mid 2010-2012)
(July, 2010 / June 2012)
Model ID: MacPro5,1
3.33GHz
Mac Pro 8-Core (Mid 2010)
(July, 2010)
Model ID: MacPro5,1
2.4GHz
Mac Pro 12-Core
(Mid 2010-2012)
(July, 2010 / June 2012)
Model ID: MacPro5,1
2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz
Mac Pro (Early 2009 Quad-Core)
(March, 2009)
Model ID: MacPro4,1
2.66GHz, 2.93GHz, 3.33GHz
Mac Pro (Early 2009 8-Core)
(March, 2009)
Model ID: MacPro4,1
2.26GHz, 2.66GHz, 2.93GHz
Mac Pro (Early 2008)
(January, 2008)
Model ID: MacPro3,1
2.8GHz, 3.0GHz, 3.2GHz
Mac Pro (8-core)
(April, 2007)
Model ID: MacPro2,1
3.0GHz
Mac Pro
(August, 2006)
Model ID: MacPro1,1
2.0GHz, 2.66GHz, 3.0GHz
Xserve (Late 2006)
(August, 2006)
Model ID: Xserve1,1
dual 2.0GHz, dual 2.66GHz, dual 3.0GHz
Xserve (Early 2008)
(January, 2008)
Model ID: Xserve2,1
2.8GHz, dual 2.8GHz, dual 3.0GHz
Xserve Quad-Core (Early 2009)
(April, 2009)
Model ID: Xserve3,1
2.26GHz
Xserve 8-Core (Early 2009)
(April, 2009)
Model ID: Xserve3,1
2.26GHz, 2.66GHz, 2.93GHz
PC Desktops
Compatible with Intel / AMD Process based PCs capable with the specifications listed above.
PCIe capable servers
Compatible with PCIe expandable servers with the specifications listed above.
OWC Mercury Helios
Thunderbolt PCIe
expansion chassis
NOT COMPATIBLE
HP DL 380 G7
HP DL 380 G8
NOT COMPATIBLE
Dell PowerEdge R620
NOT COMPATIBLE
Dell PowerEdge T620